top of page

Resources

/

Modules

/

Procedures

Modules

Procedures

Standardize how work gets done with step-by-step procedures your team can follow.

Still stuck?

Our support team can walk you through it

Contact Support

Procedures in Chekhub


A Procedure is a step-by-step set of instructions a technician follows to complete a job, such as an MOP (Method of Procedure), an SOP (Standard Operating Procedure), or an EOP (Emergency Operating Procedure). You build a Procedure from a template, publish it, and then attach it to tickets and PMs. Procedures can't be attached to rounds.


In Chekhub, an MOP is usually the Procedure itself, and the SOPs are the Checklists that make it up. Every Procedure is organized into four sections:

Section

What goes here

Procedure Start Checklists (Pre-Work)

Checklists completed before maintenance begins

Procedure Checklists

The maintenance itself

Procedure End Checklists (Post-Work)

Checklists completed to close out the job

Backout Plan Checklists

Steps to reverse the work if something goes wrong

1. Create a Procedure template

Procedure templates are built in the Admin panel, so every Procedure created from a template stays consistent, with the same approval cycle, properties, and ordering each time. Everything you add to a template (properties, Checklists, approvals, materials, and attachments) populates any Procedure created from it.

One template can be used to create many Procedures. Procedures, not templates, are what get attached to tickets and PMs. Changes to a template don't update Procedures already created from it; they only apply to Procedures created from that template afterward.

  1. Click Admin at the bottom of the left sidebar.

  2. Open the Procedures tab.

  3. Under Templates, click + ADD. The Create Procedure Template screen opens.

  4. Enter a Template name (required). Optionally choose a Category and add a Description and Tags.

  5. Add properties, Checklists, approvals, materials, and attachments, as described below.

  6. Click Save Template (the checkmark button at the top right).


Categories

Categories group Checklists and Procedures. They're typically organized by site, discipline, and procedure type (MOP, SOP, or EOP). The structure can vary by customer, but should stay consistent across an organization.

To add a category, click Checklists in the left sidebar, then click the + button (the grid icon) at the top of the All Categories panel.

Properties

Properties are custom fields that hold extra information about the Procedure. They live under Details on the left side of the editor.

  1. Under Details, click + PROPERTY (or + SECTION to start a new group).

  2. Fill in the property:

    • Name: what the field is called

    • Type: Text (the default), Number, Date, Multiple Choice, Single Choice, or Yes / No

    • Value: the field's content

    • Optional / Required: whether it must be filled in

    • Locked: check to lock the field value so it can't be edited when the template is applied


Checklists

The four sections on the Checklists tab make up every Procedure. Click + ADD beside a section to populate it with Checklists.

  1. Click + ADD beside the section (for example, Procedure Start Checklists).

  2. Choose a Checklist from the Checklist dropdown. The row shows the Checklist's number, name, and version, for example C-13 Air Filter Replacement (v1).

  3. Turn on Single-Checklist beneath a Checklist to have it completed once for all assets. When it's off, the Checklist must be repeated for every asset associated with the work. To apply this to the entire Procedure, turn on Enforce Single Checklist on the left.

  4. Use the arrows to reorder Checklists, or the X to remove one.


To require that sections be completed in order (Start, then Procedure, then End), turn on Enforce Checklist Order on the left. Backout Plan Checklists are exempt.


Approvals, materials, and attachments

The three tabs beside Checklists add approval cycles, materials consumed, and attached files to the Procedure when the template is applied.

  • Approvals: click + STAGE, type an Instruction, and click + APPROVER to choose a person or role. Use the Add approver icon to add someone who must also approve (And: everyone in the chain must approve), or + CHAIN to add an alternative chain (Or: any one chain can approve). See section 4 for how approvals work.

    An approval stage on a Procedure template. George Smith and Simon West must both approve, or anyone with the Manager role can approve alone.
    An approval stage on a Procedure template. George Smith and Simon West must both approve, or anyone with the Manager role can approve alone.
  • Materials: click + MATERIAL, then choose the material and the Source location it's drawn from. These materials flow into the Materials tab of any ticket the Procedure is applied to, and are deducted from stock when the ticket closes. Don't add the same material again on the ticket, or it's counted twice. For details, see Materials on Tickets, PMs, and Procedures in the Inventory guide.

  • Attachments: click ATTACHMENT to upload a file, or LIBRARY to choose one from your Library.


2. Create a Procedure

Creating a Procedure starts with template selection. Once you've selected a template, you can begin building out the Procedure. Until it's published, the Procedure exists in the Draft state and can't yet be added to a ticket or PM. Once published, the Procedure is available for selection.

  1. Click Checklists in the left sidebar.

  2. Click Create Procedure at the top of the page.

  3. In Select a template, choose the template and click APPLY.

  4. On the Create Procedure screen, enter a Name (required). Optionally choose a Category and Site, and add a Description and Tags.

  5. Review the Checklists, properties, approvals, materials, and attachments carried over from the template. The menu on the left jumps between them.

  6. Click the checkmark at the top right to save the Procedure as a draft.

  7. Publish the Procedure (see section 4).


3. Attach a Procedure to a ticket or PM

Once a Procedure is published, you can attach it to a ticket or a PM.

On a ticket:

  1. Create a ticket (or open one) and stay on the Ticket tab.

  2. In the Workflows section, turn on Require Procedure. A SELECT PROCEDURE button appears.

  3. Click SELECT PROCEDURE, choose the Procedure, and click APPLY.

  4. Fill in each workflow's dates, Locations/Assets, and Teams/Members, then save the ticket. The Status Requirements panel shows anything still missing.


On a PM:

  1. Click Schedule PM and enter a Title.

  2. Go to Step 3: Select Checklists.

  3. Turn on Require Procedure (a small toggle just above the top-right corner of the Checklists panels).

  4. Search for the Procedure, select it, and finish the remaining steps.


Once the ticket or PM is assigned, the Procedure appears as a set of tasks, one for each of its Checklists. Each task gets its own number (for example, I-3333.1), dates, location, Checklist, and assignee.


Example: monthly UPS inspection

Attach your UPS inspection procedure, and an interval will automatically generate each month with your attached procedure.

  1. Click Schedule PM and enter a title.

  2. In Step 1: Schedule Maintenance, set a start date and choose Every Month from the repeat dropdown.

  3. In Step 2: Select Assets, select the site, then check your UPS units under Assets/Locations. They appear under Selected for Maintenance.

  4. In Step 3: Select Checklists, turn on Require Procedure. Choose UPS Inspection MOP. Its checklists (Isolation SOP, Transfer SOP, UPS Inspection SOP and Restoration SOP) appear under Selected Procedure.

  5. Finish the remaining steps and save.


Each month, an interval will generate with the selected procedure, and a technician will be prompted to perform the approved procedure on every UPS unit, keeping steps consistent across equipment.


On the technician’s phone, the procedure opens one step at a time. Some steps ask for a photo, and others for a reading or a checkmark.


A procedure in progress on mobile, shown here with a PDU replacement. Completed steps are checked off, and photo steps ask you to tap Select Image(s) to add a picture.
A procedure in progress on mobile, shown here with a PDU replacement. Completed steps are checked off, and photo steps ask you to tap Select Image(s) to add a picture.

4. Approve and publish a Procedure

A Procedure must be published before it can be attached to a ticket or PM. If it has approval stages, those approvals happen before it's published.

State

What it means

Draft

The Procedure has been created but not published. It can't be attached to work yet.

Draft in Review

The Procedure has been submitted for publishing and is waiting on approvers. The Procedure page still shows it as Draft.

Published

All approval stages are approved (or there were none). The Procedure can be attached to tickets and PMs.

A new Procedure's page shows its number and state (for example, P-2 | Draft). If it has approval stages, Requires Approval shows how many.

  1. In Checklists, open the draft Procedure and click Publish changes next to its Draft status.

  2. If approval stages are configured, the Submit Procedure for Review window opens. Optionally add a change description, then click SUBMIT. Each stage's approvers are asked to approve it, and the Procedure stays in Draft until every stage is approved.

    While a Procedure is waiting on approvers, its page still shows Draft, but the Publish changes link no longer appears.

  3. The approver opens the Procedure, which shows Approval required for review stage 1 with the stage's instruction, reviews it, and clicks APPROVE or REJECT.

  4. Once every stage is approved, the Procedure is published.


If no approval stages are configured, nothing prevents the Procedure from being published right away. The same approval sequence applies whenever an existing Procedure is edited.

Related guides

chekhub-guide-cover-placeholder.png

Modules

Inventory

chekhub-guide-cover-placeholder.png

Modules

Calendar

chekhub-guide-cover-placeholder.png

Modules

Checklists

bottom of page